Cooler Master V Platinum 1600 V2 (ATX 3.1)

  • Advanced Heat Dissipation: The purple anodized heat sink with bevel cuts effectively lowers temperatures by concentrating the flow field and enhancing heat dissipation.
  • Dual Durable 90° 12v-2X6 Cables: Featuring a 90° 12V-2×6 PCIe 5.0 connector, for improved electrical durability and safety.
  • ATX 3.1 Cables: The ATX 3.1 delivers up to 600W per connector, for an impressive 1200W output.
  • Mobius Fan: An advanced oil reflow, ring blade design, and accelerated air vents, this setup excels in noise reduction and thermal performance.
  • Loop Dynamic Bearing: The design features a thick oil coating and lubrication for stable performance.
  • Zero Speed Mode: Featuring lower noise level output and improved airflow thanks to a higher RPM.

8.050.000 

Cho phép đặt hàng trước

Cho phép đặt hàng trước

Mô tả

ATX Version ATX 12V Ver. 3.1
PFC Active PFC
Input Voltage 100-240V
Input Current 16-8A
Input Frequency 50-60Hz
Dimensions (L x W x H) 160 x 150 x 86 mm
Fan Size 135mm
Fan Bearing LDB
Fan Speed 2400±10% RPM
Efficiency ≥ 92% @ Typical Load
80 PLUS Rating 80 PLUS Platinum
ErP 2014 Lot 3 Yes
Operating Temperature 0-50°C
Power Good Signal 100 – 150 ms
Hold Up Time ≥ 16ms
MTBF >100,000 Hours
Protections OPP/ OVP/ OTP/ OCP/ SCP/ UVP/ Surge & Inrush Protection
Regulatory cTUVus, TUV, CE, FCC, BSMI, CCC, EAC, RCM, UKCA, RoHS2.0 / BIS, KC (Based on region’s requests.)
ATX 24 Pin Connectors 1
EPS 4+4 Pin Connectors 1
EPS 8 Pin Connector 1
SATA Connectors 16
Peripheral 4 Pin Connectors 4
PCI-e 6+2 Pin Connectors 5
12V-2×6 Connectors 2
Series V Platinum Series
80 Plus Efficiency Platinum
Modular Fully Modular
Category Above 750W
Form Factor ATX
Watts 1600W

Thông số cơ bản

Thương hiệu

PSU Watts

1600W

Bảo hành

10 năm

Đánh Giá

0 đánh giá
0
0
0
0
0

Đánh giá

Clear filters

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Cooler Master V Platinum 1600 V2 (ATX 3.1)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *